Vw Lt35 Abs Light

The VW LT35, a formidable companion on the roads, boasts an array of features that has made it a favorite among drivers around the world. However, even the most reliable vehicles can encounter a hiccup or two along the way. One particularly pesky predicament that has left drivers scratching their heads is the elusive ABS light, a tiny yet notorious indicator that has been known to pop up at the most inconvenient times. In this article, we delve into the mysterious world of the VW LT35 ABS light, unraveling its meaning, potential causes, and how drivers can navigate this enigma with ease. Prepare to embark on a journey through the captivating realm of automotive mysteries, where we shed the light on the ABS conundrum that bewitches LT35 owners.

Why Is My ABS Service Light On?

When your Volkswagen’s ABS service light is on, your antilock system has been deactivated due to a malfunction.

Your vehicle’s regular brakes should be working just fine, but the ABS system that prevents your vehicle’s wheels from locking up during braking will not be. If your vehicle is equipped with a stability or traction control system, this feature will be disabled as well.

Each ABS sensor is mounted on each wheel to monitor its speed. If one wheel is turning slower than the other three when you brake, that indicates that it is locking up and may cause skidding and loss of steering control. ABS will usually intervene by rapidly pumping the brakes at the wheel that is locking up, allowing it to spin so that the driver retains braking and steering control.

Here’s what causes your ABS to malfunction:

  • A blown fuse for the system
  • A wheel-speed sensor that is damaged or covered by road grime
  • A broken wire between the sensors and the ABS controller
  • An ABS controller that has stopped working

Repair Your ABS Brakes At Our Peoria Volkswagen Service Department

Volkswagen Service Center in Peoria

If your ABS light is on, you should schedule a service appointment at our service department as soon as possible. Our certified trained technicians will ensure you receive the best care possible while our Volkswagen service specials help you cut costs.

If you have any questions about your ABS light or want to schedule a service appointment, don’t hesitate to contact us at our Peoria Volkswagen service department today.


1. “Unveiling the Enigmatic Glow: Exploring the VW LT35 ABS Light Mystery”

Eager minds may find themselves in a perplexing pursuit when faced with the enigmatic glow of the ABS light in a VW LT35. As this mysterious beacon illuminates, drivers are left questioning its purpose and potential consequences. Join us on an investigative journey where we delve into the depths of this inscrutable phenomenon, peeling back the layers of uncertainty to shed light on the bewildering ABS light mystery.

    • First and foremost, it is essential to understand what ABS stands for: Anti-lock Braking System. The ABS light serves as a warning indicator to alert drivers of potential problems with this integral component of the vehicle’s braking system. Its illumination indicates that a fault has been detected in the ABS system.
    • But what could be the cause behind this perplexing ABS light? A variety of factors may contribute to its illumination, such as faulty wheel speed sensors, malfunctioning ABS module, low brake fluid levels, or even damaged ABS wiring. The absence of a clear-cut answer only adds to the compelling nature of this enigma.


2. “Intrigue Behind the Dashboard: Decoding the VW LT35 ABS Light’s Secret Signals


  • On most vehicles the ABS system does a self-test every time you turn on the car. Once you start your vehicle, the light will briefly come on, and if the computer finds a problem, the light will stay on. If you notice the light flash immediately after starting the vehicle, then it’s just a self-check.
  • The brake pedal will act differently when ABS is engaged. That pulsating you notice isn’t caused by the adrenaline that you feel in a dangerous situation. It’s the ABS system trying to make sure you the mechanical system does not lock up. Once you feel this pulsating, don’t release the brake. That would be a signal to the brakes that the danger is over. Instead keep your foot on the brake pedal and let the ABS system do its work.


  • The ABS brake light doesn’t mean you have zero braking capability. Instead it means that your brakes are now on their own, and you are too. If conditions are bad, your brakes will perform like brakes did before ABS. Without regulation, your brakes may stick right when you need them the most. If the light remains on, you need have our service department check it out immediately. Since the ABS helps with vehicle control and stopping distances, it is an important safety feature to maintain.
  • If both the ABS and the brake system light come on at the same time, your vehicle is no longer safe to drive. This means there is a serious problem with the car’s braking system and continuing to drive puts yourself and others at risk.

The sensor is located on the car’s transmission and this is why it is sometimes called the transmission speed sensor. It sends information to your speedometer and your engine’s computer to tell the transmission when to shift. If the speedometer in your Lexus isn’t working, or there’s a check engine light that accompanies shifting problems, be sure to let a Earnhardt Lexus technician examine your vehicle.

Lexus vehicles get good safety ratings, but if they aren’t functioning properly, travel may become dangerous. It is important to your car safety that you don’t ignore check engine lights. By the time these lights are on, the problem has become significant and may be harming other components of your vehicle.

If you have any questions regarding the engine speed sensor in your Lexus, please contact Earnhardt Lexus or our service department to learn more. We have experts on hand to help with all of your Lexus needs!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *