Diesel Oil Engine, Recoil Start Engine, 406cc 10HP 4 Stroke Single Cylinder Engine Air Cooled Recoil 3600rpm

Diesel Oil Engine, Recoil Start Engine, 406cc 10HP 4 Stroke Single Cylinder Engine Air Cooled Recoil 3600rpm

Price: $399.99
(as of Mar 30, 2024 11:13:50 UTC – Details)

Specifications:
Model：186F
type：Singer-cylinder, vertical, 4-stroke air- cooled Diesel Oil Engine
Combustion system：Direct injection
Bore*stroke(mm)：86x70mm
Displacement capacity(cc)： 406cc
Speed(rpm)：3600 rpm
Max.output(kw): 6.3
Fuel：0#diesel oil
Fuel oil tank volume(L)：5.5 L
Fuel oil consumption rate(g/kw.h)：≤280
Starting system：Recoil
Shaft Type: Keyed – Straight
Shaft Diameter: 1″ Diameter, 1/4″ Keyway
Shaft Length: 72.2mm (2-5/6″ Length)
Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth
Bolt Pattern: 4 Bolt
Oil System: Pressure and Splash
Engine Cooling Type: Forced Air Cooling
note:
Read carefully before operation
1. Refill diesel and engine oil in the shutdown state
2. Replace the diesel filter every 500 hours
3. Change the oil every 100 hours
(CD level or SAE 10W30 in winter/15W40 in summer)
4. Clean the oil filter every 100 hours
5. Check the oil and fuel level before starting
6. Turn off the fuel (diesel) switch after shutdown
In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load
Start steps:
1. Turn on the fuel (diesel) switch
2. Speed control handle to running state
3. Gently pull the starting handle until you feel resistance, and then put back the starting handle
4. Press the decompression handle
5. Pull the starter handle fully (the British stop pulling when the pulling wire is fully pulled out)
If the diesel engine does not start, repeat step 345
👍【PROFESSIONAL 】4-stroke Air- Cooled Diesel Oil Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel.
👍【SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel oil engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc
👍【PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling
👍【SHAFT PARAMETER 】 Shaft Type: Keyed – Straight Shaft Diameter: 1″ Diameter, 1/4″ Keyway Shaft Length: 72.2mm (2-5/6″ Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth
👍【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields.