Compact Jewelry Spot Welder, Gold Silver Welding Kit

• Portable jewelry spot welder for gold and silver welding
• Easy to use and operate
• Compact and lightweight design for easy portability
• Adjustable power settings for precise welding
• Comes with a welding machine kit for convenience
• Suitable for welding a variety of jewelry pieces
• Can be used for both professional and DIY jewelry making projects

30A pulse spot welding machine

• Welding current: 0-30A
• Frequency: 50/60Hz
• Welding range: 0.5-1.0MM
• Voltage: AC220V/110V
• Power: 200W
• Weight: 4.5kg
• Size: 28.5*17*12.5cm

80A pulse spot welding machine

• Welding current: 0-80A
• Frequency: 50/60Hz
• Welding range: 0.5-2MM
• Voltage: AC220V/110V
• Power: 400W
• Weight: 6.5KG
• Size: 26.5*26*14cm

1. Connect the power cord.
2. Install the hand-held welding gun/pedestal, fixture, foot switch, and needle in turn
3. Turn on the power switch.
4. Adjust the height of the needle(the welding head should extend about 1.96in.).
5. Adjust the coarse tune knob and fine tune knob.
6. Adjust welding distance.
7. Hold the workpiece with the fixture.
8. Step on the foot switch with your foot (move your foot away quickly), and the spot welding is completed.

• 1 x Jewelry spot welding machine
• 1 x foot switch
• 1 x power cord
• 1 x workpiece fixture
• 1 x needle
• 1 x needle seat

• Check whether the power supply matches the voltage.
• Do not put the welding machine in a wet place, keep it dry.
• Bright light when welding. Please wear goggles when welding, do not look directly at the welding part.
• The workpiece must not touch the tip of the needle or step on the pedal during welding, otherwise it may cause a short circuit of the machine.
• Do not step on the pedal for a long time, step on it once and start riding immediately.