Battery For Diesel Generator
A battery for a diesel generator is an essential component that provides reliable power for starting and running the generator. It serves as an indispensable backup power source when the generator is not in operation.
The battery for a diesel generator is specially designed to endure the robust demands of diesel engines. It has unique features that make it suitable for this particular application. Here are some of the key features of a battery for a diesel generator:
1. High cranking power: The battery needs to deliver a high amount of cranking power to start the diesel engine, which requires more energy compared to gasoline engines. It provides the initial power surge necessary to ignite the compression-ignition process in diesel engines.
2. Deep cycling capability: Unlike batteries used in regular vehicles, a battery for a diesel generator must have deep cycling capabilities. It should be able to withstand multiple charge and discharge cycles without significant degradation in performance or capacity. This is important as diesel generators are often used for extended periods during power outages or in remote locations.
3. Enhanced vibration resistance: Diesel engines are known for their high vibration levels due to their heavy-duty nature. A battery designed for a diesel generator has enhanced vibration resistance to withstand the constant shaking and provide uninterrupted power.
4. Long service life: A reliable battery for a diesel generator is built to have a long service life. It is made from high-quality
Details About Battery For Diesel Generator
$19.99 - $17.99
(as of Sep 13,2023 14:06:40 UTC – Details)
Pure copper motor and conductive clips, with good electrical conductivity, corrosion resistance and rust resistance.
Oil/Diesel Fluid Pump Extractor Scavenge Suction Oil Transfer Pump, Marine Electric Oil Change Pump, oil removal pump ,oil extraction pump,quick extract oil pump, portable and small oil pump.
We recommend a short break after 10 minutes continuous usage (should not exceed 30 minutes) to allow the unit to cool.
Please check whether the Little Pump switch button is in the “off” state before running. If it is not, please adjust it to ‘’OFF‘’ first so that the pump can be used safely and smoothly. It is very convenient to change the oil for your car by yourself.Quick and Efficient.
Heat the engine oil to 40-60℃ before pumping for about 15 minutes.
Before use, confirm whether the power supply matches the voltage of the oil pump.
The DC oil pump power supply is divided into (+) (-) poles, and the red line is positive, otherwise the oil pump will reverse and no oil will come out.
Pay attention to the slight vibration of the oil pump during use, and keep the Scavenge Oil Change Pump safty.
Make sure your car doesn’t stop on sloping ground, otherwise it’s completely impossible to inhale.
Do not start the car engine during operation.
Do not pump hot oil or when the car engine is running, the car engine must be completely cool down.
The oil inlet pipe and joints cannot be locked to ensure the suction and clean the oil to ensure the smooth use of the oil pump.
The working time of the oil change pump extractor 12v shall not exceed 30 minutes. After working for 30 minutes, the oil pump should be allowed to rest and cool down before continuing to use it to increase the service life.
Do not use the 12v 60w oil change pump extractor to extract water gas, paraffin, gasoline or other flammable liquids.
1 x Oil change pump extractor 12v
2 x Outlet Hose
2 x Inlet Hose
2 x Hose Clamps
2 x Battery Clamps
1 x Connecting Fitting
Inlet Hose Length: 123cm/48.4”
Inlet Hose Outer Diameter: 6mm/0.236”
Inlet Hose Inner Diameter: 4mm/0.157”
Outlet Hose Length: 140cm/55.1”
Outlet Hose Outer diameter: 12mm/0.472” Outlet Hose Inner Diameter: 10mm/0.39” Package Weight: approx 870g
Material: Plastic & Aluminium
Color: Black, Yellow
Rated Voltage: DC 12V
Maximum Power: 60W
Maximum Current: 5A
Maximum Flow: 5L/min
Diesel Flow Rate: approx. 250L / Hour
Motor Oil (40-60 degrees) Flow Rate: approx. 1L / min
Line Length: approx71cm/28”
2 sets of hoses
We are equipped with 2 water inlet hoses, 2 water outlet hoses, and 1 connecting fitting，When your tube is not long enough, you can use it for a perfect connection
Fluid extractor features a durable and adjustable hose clip,prevent oil leakage, the equipped rubber sleeve can prevent dust from entering
For easy installation, the battery clamps in the liquid transfer pump are color-coded: black for cathode and red for anode.Changing the polarity of the power supply will change the direction of oil discharge.
Start Engine heating oil up to 40ºC-60ºC,it is advisable to touch the engine with your hand and feel hot rather than very hot.
Fix the tube to the pump with hoops.
Properly connect the battery clamp to the car battery.
Insert the oil inlet pipe into the oil tank, and put the oil outlet pipe into the waste oil drum,then simply push the button.
After the oil change, the inside of the oil extractor and oil pipe do not need to be cleaned. Just wipe the outside clean and put away for the next use.
To make the oil suction pump last longer, it is recommended to keep a little oil inside when the oil change pump is not in use.
Fluid extractor automotive instructions: except ENGINE OIL/DIESEL/BIODIESEL, this oil pump extractor is NOT suitable for water, gas,gasoline, paraffin, gearbox oil or other flammable liquids. Do not test the fluid transfer pump with water.
Before use, be sure to heat the car engine to 104 °F-140 °F (40 °C-60 °C) for about 15 minutes to avoid clogging the oil pump due to oil solidification.
【Oil Pump Extractor Specificaiton】Oil/Diesel Fluid Pump Specifications：Diesel Flow Rate: 250L / Hour, Motor Oil Flow Rate(40-60℃): 1L/min, Voltage: 12V, Current: 5A, Wattage: 60W, Inlet Hose Length: 123cm/49.2”, Outlet Hose Length: 140cm/56”,Wire length: 63” (car battery power supply) or cigarette lighter power supply. Oil extractor pump has the characteristics of high power, high efficiency and safety, you can complete oil changes quickly and conveniently at home.
【Easy to Use】You just need to place the inlet and outlet hoses at the appropriate positions, install the oil transfer pump inlet and outlet hoses, tighten the hose clamps,connect the power clamps to the vehicle battery and turn on the button to start. This process is very simple ,ensure your engine runs smoothly.（Transmission fluid pump warm up the car for a while before use, so that the temperature of the engine is around 60°C, it is better to touch the engine body to feel hot but not very hot)
【Ideal Equipment For】This professional fluid pump is lightweight, portable and easy to operate, it provides quick and clean oil changes, saving time and money. Scavenge oil change pump is a perfect helper for changing oil and diesel for car, motorcycle, scooter, quad bike, truck, RV, ATV, boat, marine, forklift, generator, tractor etc,it is an indispensable and ideal device in your home.
【Operation Tips】Fluid extractor automotive instructions: except ENGINE OIL/DIESEL/BIODIESEL, this oil pump extractor is NOT suitable for water, gas,gasoline, paraffin, gearbox oil or other flammable liquids. Do not test the fluid transfer pump with water. Before use, be sure to heat the car engine to 104 °F-140 °F (40 °C-60 °C) for about 15 minutes to avoid clogging the oil pump due to oil solidification.