“10HP Diesel Engine with Direct Injection Air Cooling System” in Black

Diesel Motor 406CC 4 Stroke 10HP Single Cylinder Horizontal Axis Diesel Engine with Direct Injection Air Cooling System, Recoil Hand Start,2-5/6″ Length Flat Key Shaft Multi-Use Engine

Price: $579.99
(as of Mar 31, 2024 21:04:57 UTC – Details)

Specifications: Model:4-stroke air-cooled diesel engine, Machine Piston: Vertical Single Cylinder, Crankshaft: Horizontal, Combustion system:Direct injection, Bore*stroke(mm)：86x70mm, Displacement capacity(cc)： 406cc, Speed(rpm)：3600 rpm, Max.output(kw): 6.8, Fuel：0#diesel oil, Fuel oil tank volume(L)：5.5 L, Fuel oil consumption rate(g/kw.h)：280, Shaft Diameter: 25mmDiameter, Shaft Length: 72.2mm (2-5/6″ Length), Shaft I.D. Thread Size: 7/16-20UFN-2B, 20 mm depth, Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling Features: 1. Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. 2. Optimize fuel system and intake and exhaust system to save energy and fuel. 3. Compact structure, small size and light weight. 4. It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields. Note: Read carefully before operation 1. Refill diesel and engine oil in the shutdown state 2. Replace the diesel filter every 500 hours 3. Change the oil every 100 hours (CD level or SAE 10W30 in winter/15W40 in summer) 4. Clean the oil filter every 100 hours 5. Check the oil and fuel level before starting 6. Turn off the fuel (diesel) switch after shutdown In order for the engine to work stably for a long time and prolong its service life, it must be run for more than 10 hours under half load
【PROFESSIONAL DIESEL ENGINE】Vertical Single Cylinder, Bore*stroke(mm)：86x70mm, Displacement capacity(cc)： 406cc, Speed(rpm)：3600 rpm, Max.output(kw): 6.8, Fuel：0#diesel oil, Fuel oil tank volume(L)：5.5 L, Fuel oil consumption rate(g/kw.h)：≤280, Shaft Diameter: 25mmDiameter, Shaft Length: 72.2mm (2-5/6″ Length), Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth, Oil System: Pressure and Splash
【 DIRECT INJECTION 】4 Stroke 10HP Single Cylinder Diesel Engine good atomization, low fuel consumption, more punctual fuel injection. Optimized the fuel system and intake and exhaust systems to save energy and fuel
【AIR COOLING SYSTEM】Through advanced and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured. Overhead valve design (OHV) runs cooler and cleaner. Enhanced thickening Alloy box, fast heat dissipation, low oil temperature. All there ensures this engine long life service time
【LARGE FUEL CAPACITY, WIDE APPLICATIONS】5000mL large fuel tank volume ensure continuous working power. Premium alloy shell, special painting process, seam welding, anti-oil leakage. Widely used in road cutting machine, grinding machine, water pump, micro tiller, air conditioning compressor, micro tiller, etc
【OPEARTIONS STEPS】a. Turn on the fuel (diesel) switch; b. Speed control handle to running state; c. Gently pull the starting handle until you feel resistance, and then put back the starting handle; d. Press the decompression handle e. Pull the starter handle fully **If the diesel engine does not start, repeat step “c-d-e”**