how to remove permanent marker from white board

Last Updated on April 9, 2021 by Oluwajuwon Oladiti

If you are looking for How To Remove Permanent Marker From White Board, then look no further than this article. It includes how to peel dry erase marker off board, and how to remove dry erase marker from whiteboard. Perhaps you are interested in how to remove permanent marker from wall, then reading this article may help you.

Anyone who owns or uses a whiteboard will know that permanent markers and sharpies look and feel deceptively similar to dry wipe pens… while producing very different results. If you’ve just realised you can’t just swipe away the permanent marks you’ve just made, don’t panic: our guide will show you how to get permanent marker off a whiteboard with ease. Plus, if it’s not just on the whiteboard but also other surfaces

how to remove permanent marker from wall

How To Remove Permanent Marker From White Board

permanent marketing drawing on a wall being rubbed off with a cloth

How to clean a whiteboard: Important dos and don’ts

Before we show you how to remove permanent marker from whiteboard, there are some other helpful tips and tricks below:

  • DO try baby oil. Baby oil isn’t just for super smooth skin. Rubbing it with a cloth on the surface of your whiteboard can help to shift stubborn marks.
  • DON’T use abrasive cleaners. These can damage the whiteboard’s finish, and compromise the surface – leading to future staining with dry-wipe pens.
  • DO try other methods if. our two favourites below aren’t working for you. You could try out a magic eraser or nail polish remover to remove the ink.
  • DON’T FORGET to keep your whiteboard clean. Always wipe it down after use and clean using a good quality all-purpose cleaner such as Cif at least once a month.
  • DO make sure you keep cleaning products out of reach of children, especially if the whiteboard is in a school or a children’s playroom.

You will need:

  • Dry eraser markers
  • Whiteboard eraser

How to clean a whiteboard with dry erasers

It may seem counterintuitive, but fighting marker with marker is often very effective.

  1. Go over markings with a dry erase markerDraw over the marks you’ve made in permanent marker with a dry erase marker.
  2. Colour a solid blockColour a solid block which should completely cover all the permanent marks.
  3. Once dry, wipe cleanWhile the ink is still damp, use a whiteboard eraser to wipe the board clean.
  4. Repeat until the marker is removedRepeat steps 2-4 until all the permanent marker marks have been fully removed.

How to clean a whiteboard with rubbing alcohol

You will need: Rubbing alcohol or hand sanitiser and two soft, clean cloths

  1. Put rubbing alcohol on a soft clothUsing your rubbing alcohol or hand sanitiser, get your clean, soft cloth damp. Make sure it is not soaking as you don’t want it to drip everywhere.
  2. Gently rub away on the markerUse your damp cloth to gently rub away the permanent marker stain.
  3. Dry with a soft clothUsing a clean, dry soft cloth; dry the area.
  4. Repeat until completely removedIf the ink stain is stubborn, repeat steps 1-3 until it is completely removed.

how to peel dry erase marker off board

How To Remove Spray Paint From Your Skin

Hands covered in paint.
Unsplash / Nicole Honeywill

If you get spray paint on your skin there’s no reason to panic. It’s relatively easy to remove. First, read the label of your can to determine if you’ve managed to coat yourself with oil-based paint or water-based paint.

Water Based Paint

  1. Wash your hands under warm to hot tap water and a few drops of dish soap.
  2. If the paint doesn’t come off, a little bit of friction is required. Use a toothbrush, the abrasive side of a household sponge (not steel wool). or even an abrasive facial cleanser from your bathroom to gently scrub the area and remove the paint from your skin.
  3. Rinse
  4. Be sure to clean your sink immediately afterward.

Oil-Based Paint

  1. The best way to remove oil is with more oil. You can use essential oil, olive oil, coconut oil, or baby oil – whatever you have handy. Take care not to get any on your clothes or in your eyes. Some oils can stain or sting.
  2. Rub the oil back and forth over the painted area just as you would if you were trying to work up a lather with soap.
  3. Rinse.
  4. Repeat if necessary.
  5. Clean the sink immediately.

How To Remove Spray Paint From Metal

A microfiber cloth wipes the hood of a car.
Pixabay / melodiustenor

If you’re working outside on your project, it’s easy to let an errant spout of spray paint come into contact with a metal surface, such as metal patio furniture or the side of your car. Luckily it’s fairly easy to remove spray paint from nonporous surfaces like metal.

  1. Use a microfiber cloth. The last thing you want to do is scratch the existing paint.
  2. Apply a few drops of dish soap directly on to the offending area.
  3. Massage the dish soap with warm water and a microfiber cloth, rinsing frequently.
  4. If the paint was applied recently this should do the trick. If it doesn’t work, it’s time to move on to tougher methods. Although many online resources recommend nail polish remover, rubbing compounds, lacquer thinner, and gasoline, we strongly discourage the use of these substances because they remove the existing paint. This could lead to a very expensive problem.
  5. If soap and water don’t work, a clay cleaning bar is a preferred method for removing spray paint from metal surfaces.
  6. Cut off a section of the clay bar.
  7. Spray the section with lubricant. Although you can purchase special a clay bar lubricant, it’s cheap and easy to make your own DIY version. Just add a few drops of dish soap to a pint of warm water.
  8. Rub the paint stain firmly with the clay bar, applying more lubricant as you go if necessary.
  9. Wipe the area with a damp microfiber cloth to remove any lubricant or traces of paint.

Note: If the metal surface you’re cleaning is a car, It’s a good idea to give it a good wash and wax when you’re finished. This will make sure any abrasive bits of paint have been removed and help protect your existing paint from further damage.

How To Remove Spray Paint From Fabric

Brightly colored bottles of spray paint.
Unsplash / Ehimetalor Unuabona

Few users of spray paint haven’t dealt with noticing they’ve ended up with a bit of the stuff on their clothes. In fact, people have special outfits they save for these projects just in case.

Wet Paint

  1. If the paint is still wet, blot, don’t rub, the area with a light colored cloth and warm water. This is the same method you use to remove stains from carpet. Blotting draws the stain upwards into your towel. Rubbing, on the other hand, forces the stain down, deeper into the fabric, making it even more difficult to remove.
  2. Use a dab of dish soap oil-based stain remover if necessary.
  3. Blot the area with a dry cloth to absorb the paint.
  4. Repeat as necessary.

Dry Paint

  1. Use a butter knife, spoon, or fingernail to scrape up as much of the hardened paint as possible. Take care not to tear the fabric.
  2. Use nail polish remover or paint remover to remove the excess paint. Perform a test first on an unseen area to make sure you can safely use these substances without removing the dye.
  3. If you are dealing with fabric from clothing, throw the garment in the washing machine to remove as much as the paint as possible.

How To Remove Spray Paint From Concrete

A large red paint stain.
Pixabay / Clker-Free-Vector-Images

Pressure Washer

  1. If you have access to a pressure washer, move everything else out of the area. Pressure washers are powerful and can damage patio furniture or the paint on your car if you’re not careful.
  2. Spray the area with water from the pressure washer, moving the hose back and forth so the blast of water essentially scrubs the painted area.
  3. Rinse thoroughly and be sure to sweep up and remove all the dirt and spray paint from the area when finished.

TSP

  1. If you aren’t able to get your hands on a pressure washer, or if you are dealing with an area where for some reason a pressure washer wouldn’t be ideal, Powdered Trisodium Phosphate, or TSP, is your friend, but don’t underestimate its power. TSP should only be used in a well-ventilated area, wearing gloves, goggles, and a respiratory mask.
  2. Mix ¼ teaspoon in a bucket for every gallon of water. The number of gallons you’ll need will be determined by the size of the area you need to clean.
  3. Scrub the area with a stiff bristled brush. If the spray paint still remains, allow the solution to sit for a half hour before you attempt to remove it again.
  4. Repeat if necessary.
  5. Be sure to thoroughly rinse and clean the area of solution and debris when finished.

Removing spray paint from most surfaces is easy. All it takes is a little bit of elbow grease and know how.

Leave a Comment