How To Read Odometer On Honda Accord

Unlocking the mysteries of your Honda Accord’s odometer can feel like embarking on a thrilling adventure. As you sit behind the wheel, the digits beckon, teasing you with the promise of unveiling the secrets hidden beneath their polished exterior. Is it miles or kilometers? Should you keep track of every decimal point or simply round up? Fear not, fellow explorers of the open road, for in this article, we shall embark on a quest to decipher the cryptic language of the Accord’s odometer. Prepare to unravel its enigmatic digits and unlock the code that will forever guide you through the journey of tracking your beloved vehicle’s distance with utter accuracy. So fasten your seatbelts, ignite the ignition, and let us delve into the fascinating realm of decoding the Honda Accord’s enigmatic odometer readings with ease and confidence.

To view your current mileage or shuffle through the mileage for your current trip A or B, press the TRIP button to the left of your steering wheel, under the climate vent. Doing so will cycle through the numbers on the bottom right of your digital gauge cluster to show trip information. TRIP A or B can be reset by holding down the TRIP button. You can also have it automatically reset when you fill up with gas.

The largest value on the display will typically represent the total miles on your vehicle since new. For further confirmation, look at any paperwork you received at the time of purchase. In most cases, you should find an odometer reading from the time of sale.

Since you just bought a new vehicle, you’re going to need car insurance. To begin your search, download the

Jerry

app to find personalized quotes from over 50 top insurance providers. Jerry users save an average of $879 a year!

1. Unlocking the Secret Language of Your Honda Accord: Decoding the Mysterious Odometer

The odometer on your Honda Accord might seem like a simple display of numbers, but hidden within those digits lies a secret language waiting to be deciphered. Understanding the meanings behind the symbols and codes can provide valuable insights into your car’s history and performance. So, let’s embark on a journey to unlock the mysteries of your Accord’s odometer!

1. **Trip Meter**: This small button, often located near the display, allows you to switch between two trip meters. Use it to keep track of your mileage for specific journeys or purposes, like calculating gas mileage or monitoring the distance traveled on a road trip.

2. **Maintenance Indicator**: When your Honda Accord is due for scheduled maintenance, a small wrench symbol might appear on the screen, accompanied by a numerical code. This code correlates to a specific maintenance task listed in your car’s owner’s manual, making it easier to stay on top of routine servicing.

3. **ECO Mode**: Your Accord’s odometer also houses an ECO mode indicator, often represented by a leaf symbol. When this icon is illuminated, it means that your car is running in an environmentally friendly mode, optimizing fuel efficiency and reducing emissions. Driving in ECO mode can save you money on gas and lower your

2. Unraveling the Mileage Mystery: A Beginner’s Guide to Reading the Odometer on Your Honda Accord

The multi-information display shows the odometer, trip meter, outside temperature indicator, and other gauges.

It also displays important messages such as warnings and other helpful information.

• Switching the Display

Press the  (information) button or the SEL/RESET button to change the display.

• Odometer

Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.

• Trip Meter

Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.

Switch between trip meter A and trip meter B by pressing the SEL/RESET button.

• Resetting a trip meter

To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to 0.0.

• Average Fuel Economy

Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.

You can change when to reset the average fuel economy.

• Range

Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.

• Elapsed Time

Shows the time elapsed since the last time Trip A or Trip B was reset.

You can change when to reset the elapsed time.

• Average Speed

Shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A or Trip B was reset.

You can change when to reset the average speed.

• Instant Fuel Economy

Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).

• Engine Oil Life

Shows the remaining oil life and Maintenance MinderTM.

• Outside Temperature

Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).

The temperature sensor is in the front bumper.

Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).

It may take several minutes for the display to be updated after the temperature reading has stabilized.

Use the multi-information display’s customized features to correct the temperature.

• Adjusting the outside temperature display

Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.

• Customized Features

Use the multi-information display to customize certain features.

To customize other features, press the  button.

Customization is possible when you see the driver’s ID (Driver 1 or Driver 2) on the screen.

The driver’s ID indicates which remote transmitter you have used to unlock the driver’s door. The customized settings are recalled every time you unlock the driver’s door with that remote.

When you customize settings: Shift to (P)

• How to customize

Select the Vehicle Settings screen by pressing the  button while the power mode is in ON, and the vehicle is at a complete stop.

Press the SEL/RESET button.

• Customization flow

Press the  button.

• List of customizable options

• Example of customization settings

The steps for changing the “Trip A” Reset Timing setting to With Refuel are shown below. The default setting for “Trip A” Reset Timing is Manually Reset.

1. Press button to select Vehicle Settings, then press the SEL/RESET button.

2. Press the button until Meter Setup appears on the display.
3. Press the SEL/RESET button.
– Language Selection appears first in the display.

4. Press the  button until “Trip A” Reset Timing appears on the display, then press the SEL/RESET button.
– The display switches to the customization setup screen, where you can select With Refuel, IGN Off, Manually Reset, or Exit.

5. Press the  button and select With Refuel, then press the SEL/RESET button.
– The With Refuel Setup screen appears, then the display returns to the customization menu screen.

6. Press the  button until Exit appears on the display, then press the SEL/RESET button.
7. Repeat Step 6 until you return to the normal screen.