how to charge hyundai ioniq plug in hybrid

How To Charge The Battery of a Hyundai Ioniq Plug-In Hybrid: A blog about how to charge the battery of a Hyundai Ioniq Plug-In Hybrid.

2018 Hyundai Ioniq Plug-In Hybrid | Why Buy?

To charge your Hyundai Ioniq Plug In Hybrid, you will need to use a standard 120V household outlet.

Plug the charger into the wall outlet.

Connect the other end of the charger to your car’s port on the front console. This port is located on the right side of the vehicle, near the bottom of the dashboard.

You can also charge your car at any public charging station in your area that offers an SAE Combo plug.

Hyundai has designed the Hyundai Ioniq Plug-in Hybrid to be charged by plugging it into a standard 120-volt wall socket. You’ll need to connect the included charging cable to the port on the left side of your vehicle and then plug the other end into an outlet.

It takes about 5 hours to fully charge a depleted battery from empty, but when you’re driving, you won’t have to worry about waiting for your car to charge: The engine will automatically start up when needed and shut down when not necessary.

The Hyundai Ioniq Plug-in Hybrid is a fully electric vehicle with a small gasoline engine that acts as a generator. The vehicle can be plugged in to charge its batteries, but it can also be charged by plugging into a regular outlet or wall socket.

To charge your Hyundai Ioniq Plug-in Hybrid, you will need:

  1. A charging station. You can use either of the stations listed below:
  2. A charging cable (optional).

Hyundai’s Ioniq Plug-In Hybrid is a popular car for many reasons. It has a sleek design, it’s easy to drive, and it offers great gas mileage.

But how exactly do you charge the Ioniq? Here’s how:

  1. Connect the charging cable to your Ioniq’s port, which is located on the driver’s side of the car.
  2. Connect the other end of the charging cable to an available charging station (usually at home or at work).
  3. Wait for your battery to charge. It usually takes about 3 hours for a full charge, but will vary depending on how much power you need and how much time you have available before heading out again!

The Hyundai Ioniq Plug-in Hybrid is the first car in its class to have a battery that can be charged using both a traditional cord and an electrical outlet. This makes it possible to charge your vehicle when you’re home or at work, and also while you’re driving. To charge your car with a standard 120VAC plug, follow these steps:

  1. Park your vehicle in an open space where it won’t be disturbed for at least two hours—you should be able to see the charging station from inside your vehicle.
  2. Make sure all doors are locked and windows up—this will prevent thieves from breaking into your vehicle while it’s charging!
  3. Plug the 120VAC charger into a standard 120VAC outlet (make sure there’s power coming out of the outlet before plugging in). If there isn’t power coming out of the outlet, try another nearby outlet until you find one that works properly. Once plugged in, wait 30 seconds before starting step 4 below.

The 2018 Hyundai Ioniq Hybrid and Plug-In Hybrid have a combined EPA fuel economy of 58 mpg. The electric-only range is 29 miles for the PHEV model, and a total range of 684 miles for the HEV.

The battery pack is located under the rear seat, and has a capacity of 7.6 kW. The standard charger has a 2.3 kW output, which can be upgraded to a 7.2 kW charger for $300.

The vehicle comes with an SAE J1772 Level 1 charger that supports 110V AC power up to 3.3 kW, or 240 V AC power up to 16A (20A on the PHEV).

  1. Connect the charging cable to the vehicle, using the J-1772 connector.
  2. Plug the other end of the charging cable into an electric vehicle supply equipment (EVSE) or level 1 charger, which is a standard 120V outlet.
  3. Wait for your car to fully charge before driving it again.

Leave a Comment